Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Canarsie?
Fireplace services in Canarsie typically run $95-$250 for an annual sweep and inspection, $180-$450 for common fireplace repairs like damper and firebox work, and $1,200-$3,500 or more for liner restoration or replacement. A masonry crown rebuild generally lands between $450 and $1,400. Every job here is quoted per job by a written estimate, so the number you see on paper is the number you pay.
We’re Chimney Sweep Canarsie, and we handle the full fireplace: the firebox, the damper, the smoke chamber, the flue, and the crown above it. That matters for pricing, because when one company inspects and repairs, you don’t pay two trades to look at the same problem twice. Our technicians have up to 8 years of experience, and every estimate is free. Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A yearly sweep plus inspection in Canarsie usually costs $95-$250.
- Most fireplace repairs fall between $180 and $450; structural work costs more.
- HeatShield flue resurfacing can restore a damaged flue for less than a full liner replacement.
- Caps and crowns are the cheapest insurance against the water damage we see most often.
- Estimates are free, and the written estimate sets the final price.
Fireplace Services Cost Breakdown (2026)
Here’s how the work breaks down by line item for the Canarsie market in 2026. These are typical ranges for a wood-burning fireplace in a home of the kind common across Brooklyn. The written estimate you get after we look at the fireplace is what governs the final price, and it can land anywhere inside or below these ranges depending on what we find.
| Service | Typical Cost Range | What It Covers |
|---|---|---|
| Annual chimney sweep (with fireplace) | $95-$250 | Cleaning the firebox, damper area, smoke chamber, and flue of creosote and soot |
| Chimney inspection (Level 1) | $75-$200 | Visual check of accessible flue and firebox; often bundled with the sweep |
| Level 2 inspection (video camera) | $175-$400 | Camera scan of the flue interior, typically needed after a chimney fire, a home purchase, or a liner concern |
| Damper repair or replacement | $180-$450 | Top-sealing or throat damper that no longer opens, closes, or seals |
| Firebox repointing or minor masonry repair | $250-$800 | Rebuilding deteriorated firebrick joints and patching cracked mortar |
| Firebox rebuild (heavily damaged) | $800-$2,500 | Replacing firebrick and refractory mortar where the box has failed |
| Smoke chamber parging | $350-$900 | Smoothing the smoke chamber so smoke drafts up instead of back into the room |
| HeatShield flue resurfacing | $1,000-$2,800 | Resurfacing a cracked or pitted clay flue interior without pulling the old liner |
| DuraFlex stainless liner installation | $1,800-$4,500 | Full flexible liner for a flue that can’t be resurfaced or needs resizing |
| Chimney cap installation | $150-$500 | Gelco, Famco, or Copperfield cap sized to the flue, keeping rain and animals out |
| Crown repair or rebuild | $450-$1,400 | Sealing or rebuilding the concrete crown that sheds water off the chimney top |
| Fireplace glass door or screen replacement | $200-$700 | New doors or screens; sizing and frame type drive the price |
What pushes a fireplace job toward the high end of these ranges? The three big ones are the condition of the flue interior, whether the firebox has cracked firebrick, and whether water has already gotten in through a failed crown or a missing cap. A sweep that turns into a Level 2 inspection because the flue looks suspicious is a good outcome, not an upsell: it’s how you find out a liner is failing before smoke and carbon monoxide have a path into the house. We install and work with DuraFlex flexible liner systems, and we’re certified applicator-level familiar with HeatShield, because the material you put inside a flue decides how long the repair lasts.
What Affects Fireplace Services Pricing in Canarsie
Pricing on fireplace work isn’t a menu. Several things move the number, and most of them are things you can see if you know where to look.
- The condition of the flue interior. A clean clay flue with intact joints is the cheapest scenario. Cracked or pitted flue tiles, or a flue that’s glazed with creosote from a previous owner who burned green wood, can add hundreds to the bill because the repair moves from cleaning to resurfacing or relining.
- How the house was built. Canarsie’s housing stock includes a lot of early-to-mid 20th century homes with masonry chimneys and clay flue tiles. Those chimneys are solid but they age: mortar joints in the firebox crumble, crowns crack, and the tile liners don’t handle decades of heating and cooling cycles. Newer construction with prefabricated fireplaces is a different job with different parts, and pricing follows the parts.
- Water intrusion. Canarsie sits on the coastal plain of Brooklyn, close to Jamaica Bay, and the weather here swings hard between humid summers and freeze-thaw winters. That cycle is brutal on masonry. A cracked crown or a missing cap lets water in, that water freezes and expands, and a $150-$500 cap job can turn into a crown rebuild or a firebox repointing if it’s left alone through a couple of winters.
- Access to the chimney. A chimney on an exterior wall with a clean roof line is straightforward. A chimney tucked against a dormer, surrounded by steep roof or blocked by a fence or tree, takes more setup and more time, and that shows up in the estimate.
- Material choice. A professional-grade cap from Gelco, Famco, or Copperfield costs more than a hardware-store cover, and it lasts. The same goes for liner material: a DuraFlex stainless liner or an Olympia Chimney venting component is specified for the job, not bought off a shelf. Cheaper materials usually cost more over the life of the chimney.
- Whether the work is combined. Sweep, inspection, cap, and crown can be handled by one company on one visit. Splitting the work between a sweep-only crew and a separate mason often means paying for two trips, two setup fees, and the finger-pointing that happens when neither wants to own a problem.
How to Save on Fireplace Services
The honest way to save on fireplace services is to catch problems while they’re small. A $150-$500 cap today prevents a crown rebuild and a firebox repointing later. A sweep every year keeps creosote from building to the point where it damages the flue and turns a $95-$250 cleaning into a $1,000+ resurfacing job. Chimney problems don’t get cheaper when you wait.
Beyond timing, a few practical moves:
- Bundle the sweep and inspection. A sweep without an inspection is a missed diagnosis. When they happen together, you pay one visit instead of two, and you get a written record of the fireplace’s condition that’s useful if you’re buying or selling the house.
- Only burn seasoned wood. Wet or green wood produces far more creosote, which means more frequent sweeps and a higher risk of a flue fire. What’s in your woodpile directly affects what’s in your flue.
- Ask about HeatShield before committing to a full reline. If the flue has cracks but the structure is sound, resurfacing can cost less than pulling the flue apart for a new liner. It isn’t right for every flue, but it’s worth asking about.
- Get a written estimate before any work starts. Estimates here are free, and the written estimate sets the final price. Ask what’s included and what would trigger an increase once the work begins.
- Fix the crown and cap first if water is the issue. Water damage is cumulative. Stopping it early is the cheapest repair you’ll ever make to a chimney.
To price out your own fireplace, call (833) 508-9953 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Is a professional fireplace sweep worth the cost in Canarsie?
Yes. A $95-$250 annual sweep is the cheapest line item on this page and the one that prevents the most expensive ones. Creosote builds up in every wood-burning fireplace, and once it reaches a certain thickness it’s a fire hazard and a flue-damaging problem. We also find things during a sweep that a homeowner can’t see: cracked firebox joints, a damper that doesn’t seal, a crown that’s started to crack. Catching those at $95-$250 instead of $1,400 is the whole point. Call (833) 508-9953 for a free estimate.
Is it cheaper to repair or replace a fireplace in Canarsie?
Repair is almost always cheaper, and replacement is rarely the answer for a masonry fireplace. Damper repair at $180-$450, firebox repointing at $250-$800, and crown work at $450-$1,400 all fix specific problems without touching the structure. Full replacement only comes up when a prefabricated insert or firebox has failed beyond repair, or when a flue can’t be resurfaced or relined. Even then, a DuraFlex liner installation at $1,800-$4,500 is far less than tearing out and rebuilding a chimney. Call (833) 508-9953 for a free estimate and a straight answer on which one you actually need.
How much does HeatShield flue resurfacing cost in Canarsie?
HeatShield flue resurfacing typically runs $1,000-$2,800 in Canarsie, depending on the flue’s height, diameter, and how much damage needs to be filled before the resurfacing goes on. It’s the middle path between a cleaning and a full liner: if the clay flue has cracks and gaps but the structure is intact, resurfacing seals the interior without pulling the old liner out. We’re certified applicator-level familiar with HeatShield, which matters because the product only performs if it’s applied correctly to a properly prepared flue. For a DuraFlex liner instead, expect $1,800-$4,500. Call (833) 508-9953 for a free estimate.
What does a chimney cap and crown cost in Canarsie?
A chimney cap installed runs $150-$500, and crown repair or rebuild runs $450-$1,400. These are the two line items most homeowners skip and most regret skipping. The crown is the concrete top of the chimney that sheds water; when it cracks, water runs down into the masonry and freezes, and the damage compounds every winter. The cap keeps rain and animals out of the flue. We source caps from Gelco, Famco, and Copperfield because those are the brands chimney professionals specify, and we size the cap to the flue rather than fitting a universal cover that rattles loose. Call (833) 508-9953 for a free estimate.
Can you come today for a fireplace problem in Canarsie?
Often, yes. We run same-day service when the schedule allows, and dispatch runs from 7am to 7pm, Sunday through Friday. If your damper is stuck open, smoke is backing into the room, or you’ve had a chimney fire, call and we’ll find the earliest opening. We answer 24/7, so a call outside dispatch hours is booked into the next opening. For a non-urgent sweep or inspection, a scheduled visit is usually the same week. Call (833) 508-9953 for a free estimate.
Why choose Chimney Sweep Canarsie for fireplace work?
Because the company that inspects your fireplace is the company that repairs it. That’s not a slogan; it’s how the pricing stays honest. When a sweep-only crew finds a cracked crown or a failing flue, they hand you a referral and you start over with a mason who has to see the problem for themselves. We handle the whole fireplace lifecycle in-house: sweeping, inspection, cap and crown, chimney repair, and fireplace services. Five categories, one relationship.
We name the materials we install so you know exactly what’s protecting your home. DuraFlex and Olympia Chimney for liners and venting. HeatShield for flue resurfacing. Gelco, Famco, and Copperfield for caps and covers. These are the brands specified by people who do this work for a living, not the brands on the endcap at the hardware store. Our technicians have up to 8 years of experience, and the local professionals we connect you with are licensed and insured as their state requires.
One more thing worth saying plainly: some of this work is genuinely dangerous to do yourself. The flue carries combustion gases, including carbon monoxide, and a liner or damper that isn’t right is a real health risk. Masonry work at the top of a chimney is height work on a roof. A trained professional should handle the repair. What you can do is know what to look for, ask good questions, and get the inspection that tells you where things stand.
Book your free fireplace estimate in Canarsie
Fireplace pricing is only useful if you know which range applies to your chimney. The fastest way to find out is a free estimate. Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, and we’ll come out, look at the firebox, the flue, and the crown, and put a written price in front of you before any work starts.
Pricing reflects the Canarsie market as of 2026. Chimney Sweep Canarsie offers free estimates – call (833) 508-9953.
Written by the team at Chimney Sweep Canarsie.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Scott Thompson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Yolanda Delgado"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Wade Padgett