Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midwood
If you live in Midwood and your chimney crown is cracked or your cap has rusted loose, you’re looking at the two most common sources of water damage on this neighborhood’s roofs. We work on these chimneys regularly, from the pre-war one- and two-family houses off Ocean Avenue to the semi-attached homes near Avenue J, and we know how salt air and freeze-thaw treat that old brick. Call (833) 508-9953 and we’ll book a sweep or an inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Canarsie for Chimney Cap & Crown
The reason people in Midwood call us back is simple: we do the whole job. A sweep with no inspection is a missed diagnosis, and a crown repair done by a sweep-only crew is often just a coating over a problem that needed a rebuild. Cap and crown work is one of our five core services, alongside sweeping, inspection, chimney repair, and fireplace repair, so the same team that finds the crack fixes it and stands behind it.
We work with professional-grade materials: HeatShield for flue resurfacing, DuraFlex flexible liners, and caps from Gelco, Famco, and Copperfield. Those are the names chimney professionals specify, not hardware-store substitutes. Naming what sits on your chimney matters here, because a galvanised cap that corrodes in three coastal winters and a stainless one built to last are not the same purchase. We also understand the building stock. We know that a great many Midwood chimneys are parged or stucco-clad soft brick from the 1910s and 1930s, and that changes what a repair looks like. Book us for Midwood and we’ll show you what we find, with photos, before anything is quoted.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midwood
Cap Installation
We install custom and stock caps sized to your actual flue count, from brands like Gelco and Copperfield, so downdrafts and rain stay out of a flue that may only see occasional use. On a Midwood chimney with a single brick stack, a properly fitted stainless cap is the first line of defense against water intrusion. It also keeps birds and debris out between sweeps.

Cap Replacement
Many Midwood chimneys still wear the original galvanised cap, and after years of humid summers, nor’easters, and coastal salt, the fasteners give out and the cap goes loose, rattling in the wind. We replace it with stainless where the original was galvanized, and we set it true so it does its job for years instead of seasons.

Crown Repair
This is where Midwood keeps us busy. A mortar crown from an early-20th-century chimney cracks along the flue, and because the brick below is parged or stucco-clad, water gets behind the coat instead of shedding off it. That drives spalling through freeze-thaw. Often the right answer is to break out the old wash and pour a new overhanging crown with a proper bond break at the flue, not to patch the surface.

Crown Coating
When the crown is sound but showing shallow surface checking, a professional-grade coating can buy real time and extend its life. We’ll tell you honestly when a coating is enough and when it’s a bandage over a cracked wash that needs rebuilding. You see the photos and the reasoning before anything is recommended.
For multi-flue stacks, we fit a single stainless multi-flue cap over the whole chimney, a good option on the two-family houses common across Midwood where one stack serves more than a single flue.
If you’d like a closer look at the full range of what we handle, our Chimney Cap & Crown team covers every option and will walk you through what fits your stack.
Trusted Brands We Service in Midwood
We install and work with caps and liners from Gelco, Olympia Chimney, Famco, and Copperfield, and we’re familiar with HeatShield resurfacing and DuraFlex flexible liner systems. These are professional-spec products a specialist specifies, not retail alternatives, and the difference shows up in how they hold up against salt air and freeze-thaw. We name what we install so you know exactly what’s protecting your home. We don’t claim to keep parts in stock or carry inventory on a truck; we source to the job. What we can promise is straight answers about materials and performance so you can make an informed decision on your Midwood chimney.
Common Chimney Cap & Crown Problems We See in Midwood Homes
- Cracked mortar crowns on 1910s – 1930s brick. The original crown cracks along the flue, and on parged or stucco-clad brick the water then gets behind the coat instead of running off. The visible crack is often the symptom; the spalled brick underneath is the real repair.
- Corroded galvanised caps and rusted-through fasteners. Coastal humidity and nor’easter winds work a cap loose over time, so it rattles and lets downdrafts and rain into a flue that may only see occasional fireplace use. Stainless holds up where galvanized gives out.
- Backdrafting on shared two-family stacks. In many Midwood two-family houses, one stack serves the owner’s fireplace and the tenant’s year-round boiler flue. When that shared flue is blocked or undersized, it backdrafts, and the smell gets blamed on the crown or cap before the flue itself is checked.
- Piecemeal relining and mismatched flue tiles. Decades of partial repairs on these old chimneys leave mismatched flue tiles, and a proper inspection has to check for that before any cap or crown work is recommended.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Midwood, NY
Here’s what this kind of work typically runs in Midwood. A stock cap installation usually lands around $250 to $550; a custom or multi-flue stainless cap runs $600 to $1,400 depending on flue count. A crown coating is typically $350 to $700, while a full crown rebuild with a new overhanging pour is commonly $900 to $2,200. Liner-related repairs sit higher and are quoted on their own. What moves the number: flue count, whether the crown needs a rebuild or a coat, cap material, and how much spalled brick sits behind the parging.
| Service | Typical Midwood Estimate |
|---|---|
| Stock cap installation | $250 – $550 |
| Custom or multi-flue stainless cap | $600 – $1,400 |
| Crown coating | $350 – $700 |
| Crown rebuild (overhanging pour) | $900 – $2,200 |
These are estimates, and the written estimate sets the final price. The estimate is free, and you get a camera inspection with a photo report before anything is booked.
We Also Serve Cities Near Midwood
Midwood is one part of a service area that reaches into the surrounding communities, and we bring the same cap and crown work to homeowners there. If you’re nearby in Flatlands, Kensington, Flatbush, or Sheepshead Bay, we cover those areas too. You can read more about the neighborhoods we serve on our Midwood page. The same coastal conditions and old-brick chimneys are common across all of them, so the approach carries over.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midwood
Crowns fail faster because they take the full weather load on the top surface, and on Midwood’s stucco-clad soft brick the water they let through gets trapped behind the parge coat instead of shedding off. That trapped moisture spalls the brick through repeated freeze-thaw, so a crown that looks like a minor crack is often a sign of deeper damage. Call (833) 508-9953 for an inspection and a free estimate.
In most cases yes, because galvanised caps and their fasteners corrode quickly in coastal humidity and nor’easter wind, and a loose cap lets downdrafts and rain into the flue. Stainless holds up far better against salt air and keeps its fasteners tight. Call (833) 508-9953 for an exact quote on a stainless replacement; estimates are free.
It’s often neither, though a failed cap can contribute. On Midwood two-family houses, one stack frequently serves the owner’s fireplace and the tenant’s year-round boiler flue, and a blocked or undersized shared flue backdrafts, which reads as a fireplace smell. We check the flue itself before recommending cap or crown work. Call (833) 508-9953 to book an inspection.
Once a year is the sensible interval here, and it matters more given Midwood’s salt air, humid summers, and freeze-thaw winters cycling moisture through vintage brick. Annual inspection catches a corroded cap or a hairline crown crack before water gets behind the stucco. Call (833) 508-9953 to book your inspection; the estimate is free.
Sometimes yes, but a crown that has cracked along the flue and trapped water behind the stucco usually needs a rebuild with a proper overhanging pour and a bond break at the flue, not a coating over the old wash. A coating over a failed wash hides the problem and lets the spalling continue. We’ll show you the photos so you can tell which you’re facing. Call (833) 508-9953 for a free estimate.
Book Your Chimney Cap & Crown Work in Midwood
Chimney problems don’t get cheaper when you wait, and a crown that’s letting water behind the stucco is doing damage every freeze-thaw cycle. Nothing gets recommended until you’ve seen the camera inspection and the photo report, and we’ll tell you plainly when a repair can safely wait. From the firebox to the crown, one company handles the sweep, the inspection, and the repair, so you’re not left coordinating between contractors. Call (833) 508-9953 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Canarsie.