Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Flatbush
If you own one of Flatbush’s older houses, the chimney is probably the part of the building you think about least, right up until a mortar joint crumbles or a rust stain appears on the firebox. We know these blocks well: the Victorian detached houses set back behind small front gardens, the brick and limestone row houses, the converted multi-families where a chimney now serves a gas boiler more than a fireplace. That history shapes what “repair” actually means here. Call (833) 508-9953 and we’ll set up an inspection and a written estimate.
Why Flatbush Homeowners Call Chimney Sweep Canarsie for Chimney Repair
Flatbush has no shortage of people willing to brush a flue. What’s harder to find is someone who’ll look at a century-old chimney and tell you honestly whether the problem is cosmetic or structural. That’s the work we do, and it’s why homeowners here call us back rather than starting over with a new company each time.
Our technicians have up to 8 years of experience, and a good deal of it is spent on Brooklyn’s pre-war housing stock, where a chimney is rarely just a chimney. We handle the sweep, the inspection, the cap, the crown and the masonry under one roof, so the person who finds a problem is the one qualified to fix it. No handoff, no finger-pointing between a sweep crew and a mason.
We also work with professional-grade materials rather than hardware-store substitutes, and we name what we install: DuraFlex liners, HeatShield flue resurfacing, Gelco and Copperfield caps. You should know exactly what’s protecting your home. From the firebox to the crown, it’s one company and one call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Flatbush
Most of the masonry repair we do in Flatbush comes down to four jobs. Each one addresses a different failure, and the order matters: you don’t waterproof a chimney that still needs repointing.
Mortar Repointing
Replacing the failed mortar in the joints between bricks, done with a mix matched to the old masonry rather than a hard modern mortar that traps moisture. On Flatbush’s pre-1940 houses, the original joints are often soft lime mortar that has simply worn away over decades of wet winters. Repointing done correctly lets the wall breathe again.

Spalling Brick Repair
Spalling is the face of a brick flaking off, usually because water got in and froze behind it. On Flatbush chimneys it’s common on the south and west faces, where sun and weather do the most damage. We cut out the failed bricks and replace them with matching units so the repair blends with the original wall.

Chimney Waterproofing
A breathable sealant applied to the brick after any repointing is finished, so water beads off instead of soaking in. This is the step most single-trade sweep crews skip, and it’s the one that protects the work you just paid for. On a chimney exposed to coastal air, waterproofing buys years between repairs.

Flashing Repair
The metal where the chimney meets the roof. When flashing fails, water runs straight down into the attic and the ceiling below, and it’s often mistaken for a roof leak. We reset or replace the flashing and seal the joints properly, which is the only way to stop the leak at its source.
Where the damage runs deeper than the surface, we also take on chimney rebuilding and full tuckpointing. Our chimney repair team can assess whether the chimney needs a partial rebuild, a new crown, or a liner before any cosmetic work makes sense.
Trusted Brands We Service in Flatbush
The parts on a chimney matter as much as the labor. We install and work with DuraFlex flexible liner systems, and we’re certified applicator-level familiar with HeatShield, the industry’s flue resurfacing system that lets us repair a damaged liner interior without a full replacement in some cases. For caps and covers, we source from Gelco and Copperfield, brands chimney professionals specify rather than consumer retail lines. We don’t claim to keep parts on hand or stock a warehouse; what we do is specify the right component for the job and get it installed. Knowing the brand on your cap or liner means you can look it up yourself.
Common Chimney Repair Problems We See in Flatbush Homes
Most of what fails on a Flatbush chimney fails in a predictable order. Knowing the sequence helps you decide what to fix now and what can wait.
- Rusted galvanized caps and flashing. Salt air off Jamaica Bay and the Atlantic corrodes galvanized steel first, letting water track down the brick and rust-stain the firebox. Upgrading to a stainless cap ends that cycle.
- Cracked crowns. Freeze-thaw winters open cracks in the concrete crown, and each thaw sends meltwater into the masonry below. A crown repair is cheap compared to the rebuild that follows a decade of neglect.
- Spalled clay tile liners. The shift from wood to gas boilers sends acidic condensation down the flue, and it eats the original clay tile from the inside. A sweep often reveals a liner that’s already failing.
- Orphaned flues. Many Flatbush chimneys built for coal or wood were never lined for modern gas boiler exhaust, so under NYC code they may qualify as orphaned and need relining or documented abandonment. This is the finding most homeowners don’t expect.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Flatbush, NY
Chimney repair in Flatbush generally runs from a few hundred dollars for repointing and cap work up to several thousand for a partial rebuild, and the written estimate sets the final price. Typical ranges for this market:
- Mortar repointing: roughly $450 to $1,200 depending on how many joints and how high the work goes.
- Spalling brick repair: roughly $500 to $1,500 for a section of face brick.
- Chimney waterproofing: roughly $250 to $600 for a standard chimney.
- Flashing repair: roughly $350 to $900, more if the roof covering has to be opened up.
- Partial chimney rebuild: roughly $2,000 to $6,000 where the top courses have failed.
The estimate is free, and it’s written before any work starts so you know what you’re agreeing to.
We Also Serve Cities Near Flatbush
The same masonry crews cover the neighborhoods around Flatbush, including Kensington, East Flatbush, Flatlands and Crown Heights. If your chimney has the same salt-air and freeze-thaw problems you see across Flatbush, the fix is the same. Call and we’ll set up a visit.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Flatbush
Because the typical galvanized cap can’t stand up to salt air off Jamaica Bay, and it corrodes faster here than inland. Upgrading to a stainless cap from Gelco or Copperfield ends the replacement cycle. Call (833) 508-9953 and we’ll quote a stainless cap for your chimney.
In most cases yes, because the original brick or clay tile was never sized or rated for gas flue gases. A gas boiler produces acidic condensation that spalls unlined brick from the inside, so an unlined flue is a genuine code and safety concern. A Level 2 inspection tells you exactly what you have; call (833) 508-9953 to book one.
The galvanized cap and the flashing fail first, then the crown cracks from freeze-thaw. Water gets in, rust stains the firebox, and the masonry starts to spall. That’s why we recommend stainless components and a waterproofed crown on any chimney near the coast.
Once a year is the right interval for a chimney near the coast with a gas appliance venting into it. The yearly inspection catches cap and flashing corrosion before it spreads, and it catches liner spalling before the flue fails code. Call (833) 508-9953 to schedule your inspection.
No, and repointing alone is usually the wrong order of work on a Flatbush chimney. If the flue is orphaned or spalling, cosmetic masonry work just hides the problem. We inspect the flue first, then quote the masonry to match what the chimney actually needs.
Ready to Fix Your Flatbush Chimney?
The estimates are free and the written quote is what you pay. Call (833) 508-9953 to get started. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Canarsie.