Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Canarsie Homeowners
A fireplace that smokes into the room, won’t light, or smells of soot when it’s cold outside is telling you something is off inside the system. Fireplace repair in Canarsie usually means fixing a damper that no longer seals, a firebox with cracked mortar, a gas log set with a failing pilot, or an insert that’s been sitting unused because nobody could get it working. Our technicians have up to 8 years of experience and handle the firebox, damper, insert, and gas components as one job, not a series of loose ends. We connect Canarsie homeowners with vetted local professionals, and the same company that inspects the fireplace is the one qualified to repair it. Same-day visits are often available. Call (833) 508-9953.

What Our Fireplace Repair Service Includes
Gas Fireplace Repair
A gas fireplace that won’t ignite, burns with a weak or uneven flame, or gives off an odor has a problem somewhere in the burner, valve, or ignition assembly. These units need repair when the flame pattern changes, when the pilot keeps going out, or when you notice soot on the logs that wasn’t there before. We test the gas components, check the burner and thermocouple, clean the assembly, and confirm the venting is drawing correctly before we call the job done.
Wood Burning Fireplace Repair
Wood-burning fireplaces take more wear than any other type because they handle direct flame, creosote, and heat cycling season after season. Repair is needed when the firebox mortar cracks, the brick face spalls, or the fireplace smokes no matter how well you build the fire. We inspect the firebox joints, rebuild deteriorated mortar with refractory material, and check that the smoke chamber and flue are sized and clear enough to pull properly.
Fireplace Insert Service
An insert is a heating appliance set into the firebox, and it needs service just like any other unit: gaskets wear, fans get noisy, glass clouds up, and the surround can pull away from the facing. Service matters when the insert underperforms, smells, or hasn’t been pulled and cleaned in years. We remove the insert where needed, clean the flue behind it, inspect the liner connection, and reseal the surround so it sits tight again.
Damper Repair
The damper is the metal door above the fire that controls draft and keeps heated air from escaping up the flue when the fireplace is idle. You need repair when it sticks, won’t close flush, or has rusted so badly it no longer seals. We free seized dampers, replace damaged hardware, and confirm the damper opens and closes smoothly through its full travel.
Firebox Repair
The firebox is the chamber that holds the fire, and its brick and mortar take the brunt of the heat. Repair is needed when you see cracked joints, loose bricks, or crumbling mortar that lets heat reach the surrounding structure. We cut out failed mortar, repoint the joints with materials rated for fireplace temperatures, and check the firebox floor for gaps that could let embers drop through.
Pilot Light Repair
A pilot that won’t stay lit is one of the most common gas fireplace complaints, and it usually traces to a dirty pilot orifice, a worn thermocouple, or a thermopile that’s lost its output. Repair is needed when you have to hold the knob for a minute or more, or when the pilot dies as soon as you release it. We clean the assembly, test the safety components, and replace what’s failed so the fireplace lights reliably again.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with professional-grade brands because the parts and materials behind a repair decide how long it lasts. HeatShield is the industry’s leading flue resurfacing system, and our applicator-level familiarity with it lets us address a damaged flue interior as part of fireplace repair rather than treating it as a separate project. We install and work with DuraFlex flexible liner systems, which matters when an insert or wood fireplace needs a sound liner connection before it can be used safely. We also source caps and covers from Gelco and Famco, brands specified by chimney professionals rather than sold off a retail shelf.
Olympia Chimney supply gives us access to commercial-grade liner and venting components when a repair calls for them. The point of naming what we install is simple: you should know exactly what’s protecting your home, not just that “parts were replaced.” Whether you have a HeatShield-resurfaced flue, a DuraFlex liner, or a fireplace from any other make, we can help.
Signs You Need Fireplace Repair Right Now
- Smoke rolling into the room. A fireplace that smokes with a normal fire usually has a damper that won’t open fully, a blocked flue, or a smoke chamber that’s out of proportion. It’s not a draft problem you can fix by opening a window.
- Cracked or crumbling firebox mortar. Failed joints let heat and embers reach the structure behind the firebox. This is one of the repairs that shouldn’t wait, because the damage grows with every fire.
- Strong soot or gas smell when the fireplace is off. A persistent odor points to a damper that won’t seal, a draft reversal, or a venting issue. It’s worth diagnosing before the heating season starts.
- A pilot that won’t stay lit. If you’re holding the knob down and the flame still dies, the safety components are telling you something. A failing thermocouple or thermopile needs testing by a trained technician.
- Rust, water stains, or a damper that sticks. Water getting into the flue often shows up first at the damper and firebox. A stuck or rusted damper is a sign to check the cap and crown above, not just the fireplace itself.
Our Fireplace Repair Process – Step by Step
- 1
We start with the fireplace and work outward. Before touching anything, we look at the firebox, damper, and hearth, then check the flue and cap above. Most fireplace problems are symptoms of something happening higher in the system, and we’d rather find that on the first visit.
- 2
We run a camera inspection and show you what we see. A camera run through the flue and smoke chamber gives us a clear picture of liner condition, creosote buildup, and any cracks that aren’t visible from the firebox. You see the same images we do, which means no repair recommendation rests on our word alone.
- 3
We write out the findings and the options. You get a plain explanation of what’s failing, what can safely wait, and what needs attention now. If the fireplace only needs a cleaning and a damper adjustment, that’s what we’ll tell you.
- 4
We make the repair with materials rated for the job. Refractory mortar for firebox joints, the right gaskets and hardware for inserts, HeatShield resurfacing where the flue interior is damaged, DuraFlex liner components where the connection needs rebuilding. Nothing gets patched with hardware-store substitutes.
- 5
We test the finished work before we leave. The damper gets cycled through its full range, the gas fireplace gets lit and checked for flame pattern and draft, and we confirm the smoke pulls the way it should. You’ll know the repair worked before we pack up.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Canarsie?
Fireplace repair in Canarsie typically runs $150 to $450 for a straightforward fix like a damper adjustment, pilot assembly repair, or a small firebox repoint, and $600 to $2,500 when the job involves a firebox rebuild, insert removal and resealing, or flue resurfacing with HeatShield. Those ranges are estimates only; the written estimate you receive after inspection sets the final price, and we don’t start work until you’ve agreed to it.
What moves the number is how deep the damage goes and how accessible the components are. A pilot light repair is quick. A firebox that needs mortar cut out and repointed across several courses takes longer and more material. Insert service that requires pulling the unit and cleaning the flue behind it sits in the middle. Flue resurfacing is the largest line item because it addresses the whole liner interior, and it’s often the alternative to full liner replacement rather than an addition to it.

Here’s how to avoid overpaying: ask for the camera evidence behind every recommendation. If a technician tells you the flue is failing, you should see the cracks on screen. If they tell you the firebox needs a rebuild, you should see the failed joints. Nothing we recommend goes forward without camera evidence you can look at yourself, and we’ll say plainly when a repair can safely wait until next season. A free estimate includes the inspection findings, the written scope, and the price. Call (833) 508-9953 to book one.
Fireplace Repair Near Canarsie – Our Service Area
We connect homeowners across Canarsie and the surrounding neighborhoods with local fireplace repair professionals, including East New York, Brownsville, Marine Park, Mill Basin, Bergen Beach, East Flatbush, and Flatlands. Further out, we also cover Crown Heights, Flatbush, Cypress Hills, and Bedford-Stuyvesant. Response times depend on the day and the job, and same-day visits are often available when you call early. If your fireplace needs work, ask about our fireplace repair coverage in East New York as well.
Serving Canarsie, NY – Our Local Coverage Area
We serve Canarsie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Canarsie
Fireplace repair is the work of fixing the components that make a fireplace burn safely and draft correctly: the firebox brick and mortar, the damper, the gas burner and pilot assembly, the insert and its connection to the flue, and the flue interior itself. It’s different from a sweep, which removes creosote and debris, though the two often happen on the same visit. A sweep without an inspection is a missed diagnosis, which is why we check the whole system before recommending any repair. Call (833) 508-9953 for an exact quote; estimates are free.
Most single-component repairs take one to three hours, and larger jobs like a firebox rebuild or flue resurfacing can run a full day or require a follow-up visit. The variable is access and how much material has to come out before the new work goes in. We’ll give you a realistic time window with the written estimate so you can plan around it. Call (833) 508-9953 for an exact quote; estimates are free.
Typical fireplace repair in Canarsie runs $150 to $450 for small fixes and $600 to $2,500 for firebox rebuilds, insert service, or flue resurfacing, with the written estimate setting the final price. The range depends on which components are failing and whether the flue interior needs attention. We don’t quote a number before we’ve looked, because guessing leads to surprise charges later. Call (833) 508-9953 for an exact quote; estimates are free.
Yes. We have certified applicator-level familiarity with HeatShield resurfacing and we install and work with DuraFlex flexible liner systems. That matters for fireplace repair because a firebox fix on top of a failing flue solves half the problem, and we’d rather address both in one scope. We also source caps and covers from Gelco and Famco when the repair involves the top of the chimney. Call (833) 508-9953 for an exact quote; estimates are free.
Same-day fireplace repair is often available when you call and the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. We’re closed on Saturday. Because it’s a booked visit rather than a rolling crew, the earlier in the day you call, the better the chance of getting in. Call (833) 508-9953 to check availability.
Warranty terms depend on the specific repair and the materials used, so we spell them out in the written estimate rather than making a blanket promise. Repair work and product warranties are separate, and the local professional performing the work will confirm the terms that apply to your job. Ask before work begins and you’ll have it in writing. Call (833) 508-9953 for an exact quote; estimates are free.
Clear the hearth and the area in front of the fireplace, remove any decor from the mantel, and make sure an adult is home to let the technician in. If you have a gas fireplace, know where the shutoff valve is and don’t try to light it before the visit. Note anything specific you’ve noticed, like when it smokes or how long the pilot takes to light, since that helps us diagnose faster. Call (833) 508-9953 for an exact quote; estimates are free.
Schedule Your Fireplace Repair Service in Canarsie Today
If your fireplace is smoking, won’t light, or hasn’t been checked in years, book a visit and let us show you what’s actually going on inside the system. We’ll bring camera inspection, a written flat-price scope agreed before any work starts, and a repair handled by the same company that found the problem. Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free. You can also read more about our chimney sweep in Canarsie service, or our fireplace repair coverage in Brownsville.
Written by the team at Chimney Sweep Canarsie.