Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Crown Heights
If your chimney cap is missing, rusted through, or your crown has cracked and started spalling, we install and repair both across Crown Heights. We know this neighborhood block by block, from the brownstones around Dean Street and St. Marks Avenue to the rowhouse stretches off Nostrand and Kingston, and that matters more here than almost anywhere else in Brooklyn. Chimney Sweep Canarsie handles cap installation, cap replacement, crown repair, and crown coating as part of a full chimney service. Call (833) 508-9953 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Crown Heights Homeowners Call Chimney Sweep Canarsie for Chimney Cap & Crown
Crown Heights chimneys are their own category of work. Many of these stacks were built before anyone was thinking about gas appliances, and a fair share of the flues still carry the clay tile liners they were built with. That combination means a cap or crown job here is rarely just swapping a lid on top. We look at the whole assembly first: the masonry, the crown, the flues underneath.
We’re straightforward about what we find and what we don’t. If your crown is sound and only the cap needs replacing, that’s what we quote. When a mason has told you a rebuild is the only option, we bring a camera up and confirm it before agreeing. Our technicians have up to 8 years of experience with masonry crowns, flue liners, and multi-flue caps on shared stacks, and we work with the brands professionals specify: Gelco, Olympia Chimney, Famco, and Copperfield. We know the difference between a cap that ventilates a party-wall flue properly and one that traps moisture under it. That understanding is why Crown Heights homeowners keep calling us back.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Crown Heights
Cap Installation in Crown Heights
A new cap is the first line of defense for an unlined or clay-lined flue. We size and set caps for single and shared stacks, using Gelco and Famco components, so the fit closes gaps that let water, squirrels, and nesting birds in. On Crown Heights rowhouses, a proper cap also keeps the flue interior dry between burns, which slows deterioration of the clay tile liner.

Cap Replacement in Crown Heights
Original caps on these pre-war buildings have often rusted through or lost their screens. We remove the old unit, inspect the flue top while we have access, and set a replacement matched to your stack configuration. If your cap has been patched once already, we’ll show you why replacement is the cleaner answer.

Crown Repair in Crown Heights
The crown is the concrete or mortar cap at the very top of the chimney that sheds water away from the brick and liner. Freeze-thaw cycles here crack mortar crowns and spall the brickwork below. We rebuild crowns with proper slope and overhang so water runs off the sides instead of pooling and tracking down into the flue. This is our most requested service in Crown Heights.

Crown Coating in Crown Heights
Where a crown is structurally sound but showing surface wear, a flexible coating can extend its life and seal hairline cracks. We use coating products that move with the masonry rather than cracking away from it. We recommend coating only when the underlying crown doesn’t need rebuilding, and we tell you which case you’re in.
Multi-Flue Cap and Custom Cap Work
Shared party-wall stacks need a cap sized for every flue opening, not just the one your fireplace uses. We fabricate and install multi-flue caps and custom units on Crown Heights rowhouses where standard sizes don’t fit. A cap that covers only half the stack leaves gaps that defeat the purpose.
Trusted Brands We Service in Crown Heights
We source caps and covers from Gelco, Famco, and Copperfield, and we work with Olympia Chimney components for venting and liner work. These are the brands chimney professionals specify because they hold up to weather and repeated temperature swings, not the thin retail caps sold at box stores. We don’t claim to stock parts locally; we arrange what your job needs and schedule the work around it. If you already have one of these brands on your crown or cap, we service it and will tell you honestly whether it can be repaired or should be replaced. That’s what our chimney cap & crown team does on every visit.
Common Chimney Cap & Crown Problems We See in Crown Heights Homes
- Cracked crowns from freeze-thaw. Water gets into a mortar crown, freezes, and pushes the surface apart, then meltwater runs behind the cap and soaks the clay tile liner below. Many Crown Heights homeowners first notice a ceiling stain and assume it’s a roof leak when the crown is the actual source.
- Unlined or poorly retrofitted flues. Original coal flues in these rowhouses were sometimes tied to gas furnaces without proper relining. A cap replacement is not the moment to sell a full reline unless the camera actually shows a compromised liner.
- Caps that don’t cover a shared stack. Cheap single-flue caps fitted to a multi-flue party-wall stack leave gaps, and the screens clog with leaves from the dense tree canopy, killing draft and letting animals in.
- Spalling brick at the chimney top. Decades of moisture and freeze-thaw cycles break down the brick and mortar joint at the crown line. Left alone, this spreads down the stack and eventually threatens the structure, not just the finish.
Pricing for Chimney Cap & Crown in Crown Heights, NY
A typical cap installation in Crown Heights runs $250 – $650, depending on the flue count and whether it’s a standard or custom fit. A multi-flue or custom cap for a shared party-wall stack usually falls in the $450 – $900 range. Crown repair, where the mortar crown is rebuilt with proper slope and overhang, typically runs $600 – $1,500, while a flexible crown coating for a sound crown runs $300 – $600. A full crown rebuild on a larger stack pushes toward the upper end. The written estimate sets the final price, and you’ll have it before any work is booked. The estimate itself is free. Call (833) 508-9953 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Crown Heights
Our service area reaches beyond Crown Heights into East Flatbush, Bedford-Stuyvesant, Flatbush, and Brownsville. If you’re just over the line in one of these neighborhoods, we can schedule the same cap and crown work for your home. We cover the wider Crown Heights area and the surrounding blocks.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Crown Heights
Yes. We can cap only the flues that serve your unit while leaving your neighbor’s openings properly vented and screened. On shared party-wall stacks the key is fitting a cap that covers your openings without blocking draft for the other side, and we measure the stack layout before recommending a solution.
Any exterior chimney work on a landmarked block in Crown Heights North may require Landmarks Preservation Commission approval before it’s done. That often means a different cap material from the one a rowhouse a few blocks outside the boundary could use, so a low-profile or copper option may be the right call. We’ll flag the approval question before you commit to a design.
Not necessarily. A liner is only needed if a camera inspection shows the existing clay tile is cracked, missing, or sized wrong for the appliance. We run a camera first and show you the footage before recommending a liner, so you’re never sold one on the assumption that an old coal flue must be bad.
You ask for camera evidence. A crown rebuild should only be recommended when the footage shows a crack that’s letting water through or spalled masonry that can’t hold a coating. We walk you through the footage on the monitor and tell you plainly when a crown can wait. Call (833) 508-9953 if you want a second opinion on a quote you’ve already received.
The dense tree canopy in Crown Heights, especially in the historic districts, drops leaves and debris that fill cheap cap screens fast. The fix is a cap with wider screen openings or a different style that sheds debris rather than catching it. We’ll look at your tree cover and recommend a cap that stays clear longer.
The Older the Stack, the More a Cap and Crown Have to Do
Crown Heights’ housing stock is overwhelmingly 2 – 4 story brick rowhouses and brownstones from the 1890s to the 1920s, many converted to multi-family rentals. The chimneys on these buildings often have multiple flues serving separate apartments and party-wall stacks shared between adjacent units, with original clay tile liners that are cracked, missing, or were never properly relined after a gas retrofit. A typical job on one of these rowhouses starts with a masonry crown that has cracked and spalled through freeze-thaw cycles. Meltwater runs behind the cap and soaks the clay tile flue liner below, and by the time a homeowner sees a ceiling stain, the party-wall flue shared with the adjoining unit is already wet. A qualified local pro runs a Level 2 inspection with a camera, shows the homeowner the cracked crown and any missing cap screen on the monitor, and only then quotes a crown rebuild with proper overhang or a multi-flue cap sized for the shared stack. Nothing gets recommended without footage you watch and can ask questions about.
Lining work is where the industry’s worst upselling happens here. Some contractors see an old coal flue vented to a gas furnace and recommend a full liner before anyone has looked inside. We show you what the camera sees, and if the liner is sound, we’ll tell you so. If it’s compromised, we’ll point to the exact spot on the recording. Cheap single-flue caps on multi-flue stacks are the other common failure, because they leave gaps and screens that clog with leaves from the neighborhood’s dense canopy, killing draft and letting animals in.
In the landmarked blocks of Crown Heights North, like around Dean Street and St. Marks Avenue, exterior work on a rowhouse cap or crown may require LPC approval before a single brick is reset. That means a brownstone owner here may need a low-profile or copper cap that fits the historic district, whereas the same repair a few blocks outside the boundary could use a standard unit. Our technicians have up to 8 years of experience with both scenarios, and we’ll tell you which one applies to your address.
What Happens When You Call
We ask about your chimney and the symptoms you’ve noticed: a ceiling stain, a draft that wasn’t there before, a cap that’s missing or rusted, or a crown that’s visibly cracked. We book a visit within dispatch hours. On arrival, the technician inspects the crown and cap, checks the flue top, and where the situation calls for it runs a camera inspection. You see the footage before anything is quoted. Pricing is per job by written estimate, and the estimate is free. Some issues can safely wait a season, and we’ll say so.
A cap and crown are small roofs over a system that carries fire and exhaust out of your home. When they fail, the damage is slow and invisible until it isn’t. Call (833) 508-9953 for a free estimate on cap and crown work in Crown Heights. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Canarsie.