Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Canarsie?
A chimney cap and crown job in Canarsie typically costs $275 to $650 for a standard cap installation, and $600 to $1,800 for crown repair or rebuild. A full crown replacement with a new cap on a masonry chimney generally lands between $1,200 and $2,400, with the written estimate setting the final price. Those ranges cover the parts and labor most Canarsie homeowners face, and the number that matters is the one we put in writing after we see the top of your chimney.
Here’s the short version: a cap sits on top of the flue and keeps water, birds and debris out. The crown is the concrete or mortar slope at the top of the chimney that sheds water away from the masonry. Both wear out, and both are the cheapest place to stop a much bigger repair. Fixing a cracked crown now is a fraction of what a rebuilt chimney breast runs later.
Key Takeaways
- Standard chimney caps in Canarsie run $275 to $650 installed, depending on material and flue count.
- Crown repair (patching cracks and resealing) runs $600 to $1,100; a full rebuild runs $1,200 to $1,800.
- A cap plus crown job together usually saves money over two separate visits.
- Water is the most common cause of chimney damage we find in Canarsie, and the crown is where it starts.
- Estimates are free and the price is set per job by the written estimate.
Chimney Cap & Crown Cost Breakdown (2026)
The table below shows typical Canarsie ranges for the work we do on chimney tops. These are estimates for planning. Your written estimate is the final word.
| Line Item | Typical Cost Range (Canarsie, 2026) | What It Covers |
|---|---|---|
| Single-flue stainless steel cap | $275 – $425 | Standard cap sized to one flue, with mesh screen and mounting |
| Multi-flue or custom cap | $425 – $650 | Larger footprint, custom sizing, or a cap over two or more flues |
| Copper cap | $550 – $900 | Copper construction, welded seams, long service life |
| Crown repair (crack patching, resealing) | $600 – $1,100 | Cleaning out cracked joints, patching mortar, applying a crown coat |
| Full crown rebuild | $1,200 – $1,800 | Removing the old crown, forming a new sloped crown, curing |
| Crown rebuild with cap | $1,200 – $2,400 | Combined crown and cap work in a single visit |
| Chimney chase cover (factory-built chimney) | $450 – $850 | Metal cover for a framed chimney chase instead of a masonry crown |
What pushes a job toward the top of those ranges: height and access, the number of flues, whether the crown is a simple slab or an intricate stepped design, and how much of the existing masonry has to come out. What keeps it low: a single flue, easy roof access, and a crown that only needs patching rather than rebuilding. A short chimney on a low roofline is straightforward. A tall chimney over a steep roof takes more setup, and that shows up in the estimate.
The cap itself is one of the smaller line items on most chimney tickets. What costs money is the crown, because it’s a forming and curing job, not a part you screw on. If you’re already paying for a sweep and inspection, adding a cap to the same visit is almost always cheaper than booking it separately later. We’d rather quote the whole top of the chimney in one pass than have you pay twice for setup.
What Affects Chimney Cap & Crown Pricing in Canarsie
Canarsie’s housing stock is mostly mid-century brick rowhouses and detached homes, with a scattering of newer construction near the water and along the main corridors. That mix changes what we find up top and what the job takes. Here are the factors that move the number.
- Roof pitch and height. A steep roofline or a tall chimney means more ladder work and more time setting up safely. That’s labor, and it’s a real line in the estimate. A flat or low-slope roof over a short chimney is faster and cheaper.
- Number of flues. A single flue takes one standard cap. A chimney with two or three flues needs a larger custom cap, and that jumps the price into the $425 to $650 range or higher.
- Crown condition. Hairline cracks can be patched and coated. A crown that’s crumbled to the masonry, or that was poured flat with no slope, has to come off and be rebuilt. That’s the difference between a $600 job and a $1,500 job.
- Masonry damage underneath. If water has been getting in for a while, the top course of brick may be spalled or soft. We won’t pour a new crown over failing brick. Rebuilding the top few courses adds cost, but it’s the only way the crown holds.
- Factory-built versus masonry chimney. A framed chase gets a metal chase cover instead of a poured crown. The materials and labor are different, and so is the price.
- Material choice for the cap. Stainless steel is the workhorse. Copper costs more up front but outlasts it. We install caps from Gelco, Famco and Copperfield, and we name what goes on your chimney so you know exactly what’s protecting the top.
One local reality worth naming: Canarsie’s freeze-thaw cycles are hard on masonry. Water gets into a crack in the crown, freezes overnight, expands, and widens the crack. Repeat that across a winter and a small patch job becomes a rebuild. This is also why a sweep without an inspection is a missed diagnosis. The same visit that clears the flue is the one where we get a look at the crown. If you want the full picture of what we do up there, our page on chimney cap & crown work walks through the installation.
How to Save on Chimney Cap & Crown
The cheapest chimney repair is the one you do before the damage spreads. Here’s how Canarsie homeowners keep the number down.
- Bundle the cap with the crown. If the crown is coming off anyway, adding a cap to the same visit costs less than a return trip. You’re paying for setup and access once instead of twice.
- Patch before it rebuilds. Catching a crown in the cracking stage (the $600 to $1,100 range) is far cheaper than waiting for it to fail (the $1,200 to $1,800 range). Chimney problems don’t get cheaper when you wait.
- Get the crown sloped correctly. A flat crown holds water. A properly formed crown sheds it. Insisting on the slope the first time is the single best way to avoid paying for the same repair twice.
- Choose stainless over the bargain bin. A cheap cap that rusts out in a few seasons costs more over time than a proper stainless or copper cap that lasts. We source caps from brands chimney professionals specify, not retail substitutes.
- Book the inspection with the sweep. One visit that sweeps, inspects and quotes the top of the chimney saves you a separate inspection fee and gives you a written estimate you can plan around.
Estimates are free. Call (833) 508-9953 and we’ll get a technician out to look at the crown and cap and put a number in writing. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If your chimney has a damaged flue interior as well as a worn crown, it’s worth asking about liner resurfacing while we’re up there. We’re a certified applicator of HeatShield, the flue resurfacing system, which addresses a damaged flue without a full liner replacement in the right conditions. That’s usually a separate conversation from the cap and crown, but it’s the kind of thing a single inspection turns up. From the firebox to the crown, one company, one call.
Frequently Asked Questions About Chimney Cap & Crown Cost in Canarsie
How much does a chimney cap cost in Canarsie?
A standard single-flue chimney cap in Canarsie typically costs $275 to $425 installed. A multi-flue or custom cap runs $425 to $650, and a copper cap runs $550 to $900. The written estimate sets the final price. Call (833) 508-9953 for a free quote.
Is it cheaper to repair or replace a chimney crown?
Repairing a cracked crown usually costs less, at $600 to $1,100, versus $1,200 to $1,800 for a full rebuild. Repair wins when the cracks are surface-level and the masonry underneath is sound. A rebuild is the right call when the crown has crumbled to the brick or was poured flat. We’ll tell you which one you’re looking at. Call (833) 508-9953 for an estimate.
Why do chimney caps and crowns matter so much?
They’re the two parts of your chimney that keep water out. A missing cap lets rain straight down the flue. A cracked crown lets water soak into the masonry, where freeze-thaw cycles pry it apart. Both are inexpensive compared to the structural repairs that follow. Call (833) 508-9953 to get yours checked.
Can you install a cap and repair the crown in one visit?
Yes, in most cases. A combined crown and cap job typically runs $1,200 to $2,400 and is usually done in a single visit once we’ve confirmed the chimney is safe to work on. Bundling saves you the cost of a second setup. Call (833) 508-9953 to book a free estimate.
How long does a chimney crown last in Canarsie?
A correctly formed and sloped crown, kept under a good cap, typically lasts many years before it needs attention again. A flat or poorly sloped crown fails much sooner because water sits on it. The cap is what buys you that time. Call (833) 508-9953 if you’re not sure of the condition of yours.
Chimney work is one of those jobs where the top of the system gets ignored until something leaks. A cap and a sound crown are the cheapest insurance you can put on a chimney, and Canarsie’s weather makes them earn their keep. We handle the full job, sweep to crown, with the same company that inspects it doing the repair. Call (833) 508-9953 for a free estimate and a straight answer about what your chimney needs.
Pricing reflects the Canarsie market as of 2026. Chimney Sweep Canarsie offers free estimates – call (833) 508-9953.
Written by the team at Chimney Sweep Canarsie.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Scott Thompson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Yolanda Delgado"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Wade Padgett