Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kensington, NY
We provide independent Gelco service across Kensington, and the one thing that makes our Gelco work here different is the housing itself: shared flues between adjoining rowhouses. A Gelco cap, liner or insert that fits a detached home rarely drops into a Kensington chimney without addressing the neighbor’s draft. We’re an independent shop, not affiliated with Gelco, and we work with the brand’s caps, liners and connectors alongside DuraFlex, HeatShield and Olympia Chimney components. One company handles the sweep, the inspection, the cap and the repair. Call (833) 508-9953.
Why Kensington Residents Choose Us for Gelco Service
Most sweep crews know one system well. We work on Gelco equipment often enough to know its quirks in older masonry: how a stainless knee bends at an offset flue, how a multi-flue cap sits on a parged crown that’s drifted out of level.
Then there’s Kensington. The brick here is old, the winters are hard on it, and the chimneys weren’t built for the equipment now going into them. Before we recommend anything, a camera goes down the flue so you see what we see. Photos go in the report. A sweep without an inspection is a missed diagnosis, and you deserve to understand your own chimney.
We name what we install. If your job calls for a Gelco cap or connector, that’s what we write on the estimate. If a quality aftermarket liner meets or exceeds the original spec for less, we’ll tell you that too.
Scheduling is simple. You call, we book a visit, and we agree a flat price before anyone shows up. The estimate is free. Call (833) 508-9953.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kensington
These are the failures we see most often when we open up a Gelco system in a Kensington rowhouse:
- Liner joint separation at offset flues. Gelco flexible stainless liners can pull apart at the joints or crimp where the liner negotiates a bend. In Kensington’s 1920s rowhouses, shifted terracotta tiles force sharper turns than the liner was sized for, and the seams take the stress. We scope the full run before deciding between a repair and a replacement.
- Corroded or loosened caps and flashing collars. Repeated freeze-thaw cycles work a cap loose and pit the flashing collar. Water then gets in around the crown, and that water accelerates spalling on the exposed south-facing chimneys. A cap that’s re-seated now is cheaper than the brick repair later.
- Clogged direct-vent termination caps. Gas fireplace terminations on Gelco direct-vent systems clog with soot and debris through Kensington’s humid summers. The symptom looks exactly like a failed liner: poor draft, smell, a fire that won’t draw. Clearing the cap usually solves it.
- Insert connections pulling loose at the damper. A Gelco insert or stove connector can work free from the damper area once the original mortar joints crumble. In unlined flues that becomes a clearance problem, not a comfort problem. We check the connection every time we’re on the roof.
- Creosote buildup behind a parged exterior. Some Kensington chimneys have been parged or stuccoed over the years, hiding the tile condition underneath. Heavy creosote builds quietly until the camera shows it. The chimney isn’t visible from the street, but the fire risk is real.
Gelco Service in Kensington: What Local Conditions Mean for Your Equipment
The defining fact about chimney work in Kensington is the shared flue. Dense rows of early-1900s brick rowhouses and two-family homes were built with chimneys that share a flue between adjoining units. That changes everything about a Gelco installation. When we line one side of a shared chimney, we change the pressure the other side draws against, and a neighbor’s fireplace that worked fine last winter can start smoking. In practice, that means coordinating access with the adjoining household before a liner goes in, and sizing the Gelco stainless kit to the actual flue geometry rather than the nominal dimensions. On blocks like East 4th Street between Church and Caton, many of those shared chimneys still carry original 1920s terracotta tiles that have cracked and shifted, so a routine cleaning often turns into a relining recommendation once the camera goes down. Detached-home sweeps never deal with this. We do it every week.
Gelco Models & Products We Service in Kensington
We handle the full range of Gelco chimney components homeowners here actually have: stainless steel flexible relining kits in 316L and 304 alloy series, direct-vent and B-vent caps, multi-flue caps, and fireplace insert and wood stove connectors. For critical connections and caps we source OEM Gelco parts so the fit and safety margins are what the manufacturer intended. For liners and mortars we’ll use quality aftermarket products when they meet or exceed original specs, and we’ll say so on the estimate. We’re an independent shop. We’re not a Gelco dealer, not authorized by Gelco, and not factory-trained by them. What we are is familiar with the brand. That’s why so many Kensington homeowners ask for Gelco service by name.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kensington
Every job is priced per job, and the written estimate you receive sets the final price. Nothing gets added later. Here’s what drives the number:
| Factor | What It Means for Your Gelco System |
|---|---|
| Level 2 camera inspection | Included in the sweep visit; the photos show liner condition, creosote depth and tile displacement |
| Liner complexity | Offset flues and shared-flue geometry in Kensington rowhouses take longer to line than a straight run |
| Cap or connector replacement | Priced by the component you choose, OEM Gelco or quality aftermarket |
| Crown and waterproofing work | Addressed when the camera and roof inspection show water intrusion or spalling |
Your free estimate includes the inspection findings, a photo report, and a flat-price sweep agreed before we book. If work can safely wait a season, we’ll say so. Call (833) 508-9953 for an exact quote.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kensington
It can change the draft pressure in your neighbor’s flue. A Gelco liner sized for one side of a shared chimney alters how the adjoining unit draws, so we coordinate access and check both sides before the liner goes in. Skipping that step is how a clean installation turns into a smoking fireplace next door.
No. A cap keeps water out of the flue, but spalling brick comes from moisture in the masonry itself, driven by freeze-thaw cycles on the sun-exposed side. The fix is waterproofing and crown repair alongside the cap. We recommend all three together when the inspection shows it’s needed. Call (833) 508-9953 to book an inspection.
Usually a clogged termination cap. Humid Kensington summers let soot and debris collect in the cap, and the blocked vent backs odor into the room. It mimics a liner failure but is often a straightforward cleaning.
Not without a properly sized liner and clearances. The original unlined flue doesn’t provide the clearance an insert connection requires, and crumbling mortar joints at the damper make it worse. We scope the flue before we’ll sign off on any insert installation.
Annually, and after any chimney fire or masonry damage. Older terracotta tiles in Kensington’s rowhouses crack and shift with the freeze-thaw cycle, so an annual camera inspection catches liner wear while it’s still a repair rather than a replacement. Call (833) 508-9953 – estimates are free.
Service Areas Near Kensington
We serve Kensington homeowners and the surrounding blocks, including Canarsie, East New York, Brownsville, Marine Park, Mill Basin and Bergen Beach. Our Kensington coverage also reaches adjoining neighborhoods. For Gelco work just east, see Flatbush. South of here, we serve Midwood as well.
Book Your Gelco Service in Kensington Today
Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll book a visit, sweep and camera-inspect the flue, and give you a free written estimate with a flat price agreed before you commit. From the firebox to the crown, one company, one call.
Written by the team at Chimney Sweep Canarsie.