Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across East Flatbush
If your chimney crown is crumbling or your flue has no cap on it, water and animals are already finding their way in. We handle cap installation, cap replacement, crown repair and crown coating for East Flatbush homeowners and landlords, and we do it the way this neighborhood’s housing stock actually requires: camera first, recommendation second. We know the 1920s – 1940s frame and brick semi-detached blocks off Church Ave and Nostrand, and we know that a chimney here is rarely a simple, single-appliance stack. Call (833) 508-9953 to set up an estimate. We answer 24/7.
Why East Flatbush Homeowners Call Chimney Sweep Canarsie for Chimney Cap & Crown
East Flatbush has a particular kind of chimney problem, and we’ve built our reputation here by not papering over it. A lot of the housing was built for coal, converted to oil or gas, and then left half-sealed for decades. The result is a stack that often serves two appliances at once and a crown that has been quietly failing for years. Cap-and-crown work here is as much a documentation job as a repair job.
Our technicians have up to 8 years of experience, and they bring a camera to every cap and crown estimate so you can see the liner and crown condition on the screen before we quote anything. We work with professional-grade brands like Gelco, Copperfield, and HeatShield, and we name what we install so you know exactly what’s protecting your home. From the firebox to the crown, you’re dealing with one company who both finds the problem and fixes it. That matters in a market where inspection and repair are so often split between vendors.
Whether you own and occupy or rent out floors and basements, the chimney is a liability question as much as a maintenance one. We keep the answer in writing and on camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in East Flatbush
Cap Installation
A properly sized cap keeps rain, squirrels and raccoons out of the flue, and in East Flatbush that last part is not hypothetical. Uncapped throats here pack with animal nesting and debris over the off-season, and it’s a common spring call before the first heating test. We measure the clay tile and fit a cap that actually seals the top instead of sitting loose over it.

Cap Replacement
Old, rusted or undersized caps get replaced with a correctly fitted unit, and we check the surrounding crown while we’re up there. On many of the 1920s – 1940s houses off Church Ave and Nostrand, the existing cap was sized for a different appliance arrangement and never accounted for the second flue added during a conversion. A replacement is also the moment to confirm both flues draft the way they should.

Crown Repair
The mortar crown is the concrete-like slab at the top of the stack that sheds water away from the brick. Nor’easter rain and winter freeze-thaw spall and open the joints on East Flatbush crowns, and once the surface is porous, water tracks straight down into the firebox and smoke chamber. We repair the crown so it does its job again, and we don’t quote a crown rebuild on a stack that needs relining first without showing you why.

Crown Coating
A crown coating seals a crown that is sound but worn, and it’s often the right answer for a stack that doesn’t need a full rebuild. Professionally applied coating keeps water off the joints and slows further spalling. It’s a repair with a specific scope, and we’ll tell you plainly when it’s the correct fix and when it isn’t.
Multi-Flue Cap and Custom Cap
Multi-flue caps cover several clay tiles under one housing, which is the right fit for the shared stacks common in East Flatbush’s converted two-family houses. Custom caps are sized and built to the actual stack when an off-the-shelf unit won’t sit correctly. Both keep rain and animals out while leaving the flues themselves open to draft.
Trusted Brands We Service in East Flatbush
We work with Gelco, Copperfield, and Copperfield-grade custom fabrication for caps and covers, and HeatShield for crown and flue resurfacing where the surface itself needs rebuilding rather than replacing. We don’t claim to stock parts anywhere – every cap and crown material is ordered to the job once we’ve measured the stack and documented its condition. That’s slower than pulling something off a shelf, and it’s also how you avoid a cap that doesn’t fit or a coating that fails in the first hard winter. We use certified applicator-level familiarity with HeatShield and DuraFlex where relining turns out to be the honest answer.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in East Flatbush Homes
- Cracked or spalled terra cotta liners. A cap gets quoted on a stack that actually needs relining first. This is the classic upsell trap, and it’s why we run a camera before recommending anything. If the liner is failing, we show you the footage and explain why capping alone would seal in a problem.
- Mortar crowns opening at the joints. Nor’easter rain and winter freeze-thaw spall the crown surface and let water track down into the firebox and smoke chamber. A worn crown often looks fine from the ground and only reveals itself up close.
- Uncapped or improperly capped flues in converted rentals. Animal nesting and debris build up over the off-season, and a cap sized for the original single flue doesn’t cover a stack that now serves two appliances. Landlords in particular need this documented, not just assumed.
- A shared stack starving one appliance’s draft. In a converted two-family frame house, the basement boiler and the first-floor fireplace often draw off one masonry stack. Capping one flue without confirming the other’s draft can push exhaust back into the house, so both connections get checked before we sign off.
Pricing for Chimney Cap & Crown in East Flatbush, NY
Pricing here is per job and set by the written estimate, because a stack that serves two appliances takes more work than a single-flue chimney. A typical single-flue cap installation in East Flatbush runs $250 – $550, a multi-flue or custom cap runs $450 – $900, crown repair runs $400 – $1,200, and crown coating runs $350 – $850. Where a crown repair uncovers a liner that needs resurfacing, that’s separate work and we’ll show you why it’s needed before quoting it. Estimates are free and include a camera look at the liner and crown. Nothing is recommended without evidence you can see for yourself.
We Also Serve Cities Near East Flatbush
We work across the surrounding neighborhoods as well, including Flatbush, Crown Heights, Brownsville, and Flatlands. If you’re near the border of any of these, the same camera-first approach applies. Our chimney cap & crown team covers the whole area around East Flatbush, and the process doesn’t change street to street.
Serving East Flatbush, NY – Our Local Coverage Area
We serve East Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in East Flatbush
Yes. A coal-era chimney that was converted to gas still has an open flue at the top, and in this neighborhood an uncapped throat collects animal nesting, rain, and debris over the off-season. A properly sized cap keeps all three out without blocking the draft. Call (833) 508-9953 for a free estimate and we’ll confirm the flue size before quoting.
You see it on camera before anyone quotes the work. A qualified pro runs a camera and photographs the crown and liner so you can look at the spalling, the open joints, and the water path yourself. If it’s not visible, it doesn’t get recommended. Call (833) 508-9953 to book a camera-first estimate.
Often yes, with a multi-flue cap, but only after confirming both appliances draft correctly. In East Flatbush’s converted two-family houses, a shared stack is common, and capping one flue without checking the other can push exhaust back into the house. We check draft at both connections before signing off. Call (833) 508-9953 to set up the inspection.
It depends on what the camera shows. A hairline crack that isn’t affecting containment can sometimes wait, but a spalled or displaced liner needs relining before a cap goes on, or you’re sealing a failing flue. We won’t put a cap on a stack that needs relining without telling you plainly. Call (833) 508-9953 to see the footage before you decide.
Yes. Low use doesn’t stop water, animals, or crown deterioration, and in East Flatbush the freeze-thaw and nor’easter cycle does more damage than the fire does. An annual look catches a failing crown or a blocked flue before it becomes structural. Call (833) 508-9953 for a free estimate.
If your crown is spalling or your flue has no cap on it, that’s not a job to put off through another winter. Call (833) 508-9953 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. You’ll see the camera evidence before you approve anything.
Written by the team at Chimney Sweep Canarsie.