Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Bedford-Stuyvesant
If your chimney is shedding mortar, the crown is cracking apart, or water is staining the ceiling near the stack, you’re in the right place. We handle chimney repair across Bedford-Stuyvesant, from the brownstone blocks off Bedford Avenue to the rowhouse corners near Tompkins Avenue and the long stretches of Nostrand Avenue. Local expertise matters here more than most places: the chimneys on these blocks were built for coal, and they don’t behave like modern stacks. Call (833) 508-9953 to book a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bedford-Stuyvesant Homeowners Call Chimney Sweep Canarsie for Chimney Repair
We’re a chimney specialist, not a handyman with a brush. That distinction matters in Bedford-Stuyvesant, where a repair is often a structural and restoration problem at the same time. Our technicians have up to 8 years of experience, and they’ve spent a lot of it on 1880s – 1900s brownstone and brick rowhouse stacks – the kind with cornices and parapets that weather badly and chimneys that need repointing alongside cleaning. We can work with your insurer when storm or water damage is part of the claim, so the repair doesn’t stall over paperwork.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Bedford-Stuyvesant
We close the loop here: the same crew that inspects the stack is the one qualified to fix it. That means no finger-pointing between a sweep who finds a problem and a mason who never saw the flue.
Mortar Repointing in Bedford-Stuyvesant
Freeze-thaw winters hammer the mortar joints on these rowhouse stacks, and once joints open, water works its way in and the brick starts to fail. Repointing means grinding out the old mortar and replacing it with fresh material matched to the original. On landmarked blocks, the color and profile of that mortar has to line up with the surrounding brownstone and brick, or the repair reads as a patch.

Spalling Brick Repair in Bedford-Stuyvesant
Spalling is brick that has flaked or popped at the face, usually after years of trapped moisture and freeze cycles. We replace the failed units and address the source – because a new brick set into a wet stack will spall too. This is common on the exposed chimney stacks above the roofline, where the cornice and parapet take the worst of the weather.

Chimney Waterproofing in Bedford-Stuyvesant
Water is behind most of the masonry damage we see in Bedford-Stuyvesant, and a missing cap is usually the entry point. We install proper caps and apply a breathable waterproofing treatment that keeps rain out while letting the masonry dry. We source caps and covers from Gelco and Copperfield, brands chimney professionals specify rather than consumer-retail substitutes.

Flashing Repair in Bedford-Stuyvesant
Where the chimney meets the roof, flashing is the seal that keeps water from running down into the attic or ceiling. Old flashing pulls away, cracks, or was never installed correctly. We reseal or replace the flashing and check the surrounding roof surface, since a flashing leak often shows up as a ceiling stain several feet from the chimney itself.
Two more services round out what we do on these older stacks: chimney rebuilding, where the top courses are taken down and rebuilt when the crown and upper stack are past patching, and tuckpointing, the finer joint work that preserves the look of original brickwork on a landmarked facade. Our chimney repair team covers the full range, from a small joint repair to a rebuilt stack.
Trusted Brands We Service in Bedford-Stuyvesant
We name what we install so you know exactly what’s protecting your home. For flue work we use DuraFlex flexible liner systems and HeatShield, the flue resurfacing system that many sweep-only crews don’t have. HeatShield lets us repair a damaged flue interior without a full liner replacement in the right circumstances. Our caps and covers come from Gelco and Copperfield, and our liner and venting components from Olympia Chimney and Famco. If you already have one of these brands installed, we service it. Turnaround is fast because we work with these materials directly rather than tracking them down after the inspection.
Common Chimney Repair Problems We See in Bedford-Stuyvesant Homes
- Coal-era flues never relined after a gas boiler conversion. Most of these brownstone chimneys were built in the 1880s – 1900s for coal, and when the buildings switched to gas boilers the flues were never resized or relined. The appliance ends up venting into an oversized, unlined stack with weak draft.
- Crown and mortar spalling from freeze-thaw winters. Water gets into a joint or a cracked crown, freezes, and pops the masonry apart. Without a cap, rain goes straight down the flue and speeds the whole cycle up.
- Mis-matched brickwork on landmarked blocks. When an exterior stack gets repaired without regard to landmark-block requirements, the new brick and mortar don’t match the original and the work has to be redone. Restoration is a masonry decision, not just a structural one.
- Abandoned flues and unknown venting. A technician here routinely has to trace which flue vents what before touching anything – a boiler on a lower floor and a long-disconnected fireplace above can share the same stack, and cleaning or sealing the wrong one is a hazard.
The Bedford-Stuyvesant Chimney Problem Most Homeowners Don’t See
This is the part of the job that sets Bedford-Stuyvesant apart. These brownstone and rowhouse chimneys were built in the 1880s – 1900s for coal, and they hold multiple flues that were never relined when the buildings moved to gas boilers. So a technician here routinely has to trace which flue vents what before any work is quoted – and on many blocks the building carries landmark designation, which turns an exterior stack repair into a restoration job where the new brownstone and brickwork has to match the original. In a typical Bedford-Stuyvesant brownstone, a boiler on a lower floor and a long-disconnected fireplace above it share a stack of original unlined flues. A Level 2 inspection traces which flue actually vents what before anything is promised. Freeze-thaw winters have usually spalled the crown and opened the mortar joints, letting water into the brick, while uncapped flues collect soot, leaves, and pests under the dense mature street trees. The usual fix is repointing the stack, rebuilding a cracked crown, fitting a proper cap, and – where an appliance now vents into a flue it was never designed for – installing a correctly sized listed liner such as DuraFlex or HeatShield. None of that gets recommended here without camera evidence you can see for yourself.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Bedford-Stuyvesant, NY
We give you a range up front, then a flat price agreed before we book the work. Nothing gets added quietly once the truck is on your block. These are typical estimates for this market, and the written estimate sets the final price:
| Repair | Typical range in Bedford-Stuyvesant |
|---|---|
| Mortar repointing (stack section) | $450 – $1,200 |
| Spalling brick replacement (per area) | $350 – $900 |
| Chimney crown rebuild | $600 – $1,500 |
| Chimney waterproofing | $250 – $600 |
| Flashing repair | $300 – $750 |
| Liner resurfacing (HeatShield) or reline | $1,200 – $3,800 |
| Partial chimney rebuild (upper stack) | $2,000 – $6,000 |
What moves the number: how much of the stack is affected, whether the crown needs rebuilding, roof access, and the masonry-matching needed on a landmarked block. A camera inspection and photo report are included with the estimate so the pricing lines up with what’s actually there. The estimate is free.
Serving Bedford-Stuyvesant and the Surrounding Blocks
We serve homeowners throughout Bedford-Stuyvesant and the neighboring areas, including Crown Heights, Brownsville, East Flatbush, and Flatbush. The same coal-era brick and brownstone issues show up across these blocks, so a call from just outside the neighborhood line is a call we can help with.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Bedford-Stuyvesant
We trace it with a Level 2 inspection before any cleaning or sealing. In a stack where a boiler and a long-disconnected fireplace share original unlined flues, the technician runs a camera to see which flue actually vents what, then tests draft. We never assume the layout, because getting it wrong is a carbon monoxide hazard. Call (833) 508-9953 to book the inspection.
Yes, because a gas boiler vents through the same stack, and those flues were built for coal and never relined after the conversion. An oversized, unlined stack drafts poorly and can let exhaust back into the building. A camera inspection and photo report tell you whether the flue is actually venting correctly. Call (833) 508-9953 for an estimate – they’re free.
No, it’s usually the start of water getting into the stack. A crumbled crown and spalling brick let rain in, and each freeze-thaw winter opens the joints a little further. Repointing and a crown rebuild now cost far less than a partial stack rebuild later. Call (833) 508-9953 for a written estimate.
Patching alone is risky on a landmarked block, because the new brick and mortar have to match the original brownstone and brickwork or the work fails review. We approach it as a restoration: match the masonry, then fix the underlying water problem. Before anything is recommended, we show you the camera evidence so you can judge the scope. Call (833) 508-9953 to arrange an estimate.
First-degree creosote is the light, flaky soot a brush removes in a normal sweep. The glazed, tar-like stage is third-degree – it’s baked onto the flue wall and brushing won’t touch it, so it needs a resurfacing system like HeatShield or a reline. We assess the stage during the inspection before recommending anything. Call (833) 508-9953 if you’re not sure what you’re looking at.
Book Your Chimney Repair in Bedford-Stuyvesant
Whether it’s repointing a spalled stack, rebuilding a cracked crown, or tracing a boiler flue that’s never been right, we’ll tell you what we find and show you the camera evidence before we recommend a repair. Chimney problems don’t get cheaper when you wait, but they also don’t need to be oversold. Call (833) 508-9953 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Canarsie.