Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Midwood
Chimney inspection in Midwood starts with one honest look at the whole stack, not just the flue. Most of the houses on these blocks are pre-war, and their chimneys have been patched, parged and partially re-lined for decades. A proper inspection tells you what’s actually failing, what’s still sound, and what can wait. We connect Midwood homeowners with independent local chimney technicians who inspect, document on camera, and show you the footage before recommending anything. Our technicians have up to 8 years of experience. Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Canarsie for Chimney Inspection
Midwood’s chimney problems are structural and specific. The neighborhood’s one- and two-family houses from the 1910s through the 1930s were built with original brick chimneys that were later wrapped in stucco or parged, and that skin traps moisture against soft old brick. Through these freeze-thaw winters, the crown cracks and the finish spalls. An inspector who only shines a light down the flue misses all of it.
That’s the reason we built our chimney inspection around camera evidence. When a technician from our vetted local network tells you the flue needs work, you see the same footage they’re looking at. Nothing is bundled into a single quote. Defects get documented, tiered by urgency, and explained. If a repair can wait a season, we say so plainly.
We know Midwood well enough to know where to look first: the low-rise owner-occupied blocks where a chimney has gone decades without a crown repair, and the two-family layouts where a single stack handles more than anyone realizes. If you want an inspection done by a professional who understands that, call (833) 508-9953.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Midwood
Level 2 Inspection
This is the inspection we recommend most often in Midwood, because it goes where a visual check can’t. It covers the accessible parts of the chimney, the flue, the smoke chamber, the damper, the cap, the crown and the connections between appliance and stack. On a house that’s had piecemeal re-lining over the decades, that full picture matters. It’s also the inspection you’ll want if you’ve just bought a Midwood property or changed a heating appliance, since it catches problems a seller’s quick walkthrough won’t.
Camera Inspection
A camera tells the truth. We run a video camera down the flue so the technician and the homeowner can both see the inside of the stack in real time. In Midwood, camera work routinely turns up mismatched flue tiles, missing joints and unlined sections where an appliance was tied into a stack that was never built for it. You see each defect yourself before any recommendation is made. That’s the standard we hold to, and it’s the answer to the worry that a chimney company will invent work you can’t verify.
Flue Inspection
The flue is the part of the system you never see, and it’s where the real risk lives. A flue inspection checks for correct sizing, cracks, gaps and obstructions, and confirms that every appliance venting into the stack has a flue that suits it. That last point is specific to Midwood. In the neighborhood’s two-family houses, the chimney often carries both the owner’s fireplace flue and a tenant’s boiler flue in the same stack, and a blocked or undersized shared flue will backdraft year-round. A fireplace smell in summer is often traced straight to the boiler flue, not the fireplace.
Level 1 and Level 3 Inspection
A Level 1 inspection is the annual read-through: accessible parts of the chimney and appliance, with no dismantling. It’s the right call on a sound system you’re maintaining. A Level 3 is what happens when a problem needs access behind or through the chimney structure, such as a suspected hidden defect or damage after a chimney fire. We’ll tell you honestly which level your situation calls for, and we won’t push the heavier one when the lighter one will do.
Trusted Brands We Service in Midwood
When an inspection turns up something that needs fixing, the repair is only as good as the materials behind it. We work with DuraFlex flexible liner systems and are certified-applicator-level familiar with HeatShield flue resurfacing. Caps come from Gelco, Famco and Copperfield, the brands chimney professionals specify. We name what we install so you know exactly what’s protecting your home. Every material is a professional-grade product, not a hardware-store substitute, and we can work with your insurer where coverage applies. From the firebox to the crown, one company, one call.
Common Chimney Inspection Problems We See in Midwood Homes
- Spalling parged brick and failing crowns. Midwood’s stucco-clad and parged chimneys trap moisture against soft vintage brick, and repeated freeze-thaw cycles break the surface apart. An inspection that only reads the flue will miss a cracked crown and deteriorating mortar joints entirely.
- Mismatched and unlined flues. Decades of partial re-lining leave stacks with mismatched flue tiles and unlined sections. A quick visual pass can clear a chimney that a camera shows is actually compromised.
- Shared stacks backdrafting. In two-family Midwood houses, a single stack serving a fireplace and a tenant’s boiler often pulls in year-round boiler exhaust when the boiler flue is blocked or undersized. That exhaust is routinely misdiagnosed as a fireplace creosote smell when the draft is the real issue.
- Occasional-use creosote and downdrafts. Humid coastal summers and nor’easters drive dampness into chimneys used only now and then, so creosote stays damp and downdrafts push smoke back into the house. The appliance isn’t always the problem; the setup is.
Pricing for Chimney Inspection in Midwood, NY
A typical Level 1 chimney inspection in Midwood runs $125 to $200, and a Level 2 inspection with camera work runs $225 to $350. A Level 3 inspection, where access has to be opened up through the chimney structure, is priced per job by the written estimate because the scope depends on what’s found. Add-ons like a flue camera run on an older shared stack can move the number within that range. The estimate is free, and the written estimate sets the final price. Chimney problems don’t get cheaper when you wait, so get the numbers early.
| Inspection | Typical Midwood range |
|---|---|
| Level 1 inspection | $125 – $200 |
| Level 2 inspection (with camera) | $225 – $350 |
| Level 3 inspection | Per job, by written estimate |
| Camera / flue inspection add-on | Within the range above |
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Midwood
We serve Midwood and the surrounding neighborhoods of Flatlands, Kensington, Flatbush and Sheepshead Bay with the same inspection standard. The housing stock is similar, but the findings differ, so each inspection is treated on its own. If you’re just outside Midwood, ask. You can see our full coverage area at Midwood or call (833) 508-9953 to confirm your street.
How a Typical Midwood Inspection Goes
Here’s how this kind of job usually runs. A technician climbs onto a 1920s parged brick chimney and finds the crown cracked and the stucco spalling from freeze-thaw. Then a camera goes down the flue and reveals mismatched flue tiles installed piecemeal over decades, sometimes an unlined section where a boiler appliance was tied into a stack that was never designed for it. Each defect is documented on camera and shown to the homeowner before anything is recommended. The flue gets scoped, the smoke chamber and damper get photographed, and repair options come back tiered by urgency rather than bundled into one quote.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Midwood
That smell is very often backdrafting from the boiler flue, not the fireplace. In Midwood’s two-family houses, a single stack frequently serves both the owner’s fireplace and the tenant’s boiler, and the boiler vents year-round. When that shared flue is blocked or undersized, exhaust pulls back through the stack and you smell it most in warm months. A camera inspection of the shared flue will confirm it. Call (833) 508-9953 for an exact quote on the inspection – estimates are free.
If your system is sound and you’ve stayed on top of it, a Level 1 inspection is usually enough for an annual check. If it’s a first inspection, a home purchase, or an appliance change, a Level 2 is the safer call because it goes inside the flue with a camera. On Midwood’s older, patchwork stacks, the Level 2 catches things a visual pass can’t. Call (833) 508-9953 and we’ll tell you which level fits your chimney.
Your chimney is likely trapping moisture against soft old brick. Midwood’s parged and stucco-clad chimneys were often finished with materials that seal the surface, so any water that gets behind the finish cycles through freeze-thaw and breaks it apart each winter. The fix starts with the crown and the finish, not the flue. An inspection pinpoints where the water is getting in. Call (833) 508-9953 – estimates are free.
Yes, and we’ll show you. A camera down the flue gives a clear look at whether the tiles are unlined, mismatched or cracked, and the technician will show you the footage before any recommendation is made. On Midwood stacks that have been re-lined piecemeal over decades, this is the only reliable way to know. Call (833) 508-9953 for an exact quote.
Yes, especially in a two-family Midwood house where a boiler shares the stack. Even light fireplace use leaves creosote, and the boiler vents all year, so problems build where you’re not looking. A camera inspection catches them early. Chimney problems don’t get cheaper when you wait. Call (833) 508-9953 – estimates are free.
Book a Chimney Inspection in Midwood
If your Midwood chimney hasn’t had a proper look in years, or the finish is spalling and you’re not sure why, get it inspected before it gets worse. We’ll connect you with a local professional who shows you the evidence on camera, tiers the findings by urgency, and lets you decide. Call (833) 508-9953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, so there’s no reason to put it off another season.
Written by the team at Chimney Sweep Canarsie.